Top 15 Best Two-Piece Toilets in 2020 – Ultimate Guide

Two-piece toilets have a separate flush tank and a separate toilet bowl with the seat while in the case of one-piece Top 15 Best Two-Piece Toilets in 2019toilets, these are preconnected as one unit. However, two-piece toilets are similar to one-piece toilets in many respects.  The purpose of these toilets is exactly the same and they even flush in a similar way though it depends on what the flushing mechanism is. They are installed similarly too, except that while installing the two-piece toilet; they are much more easily installed as compared to the one-piece ones. Both of these types of toilets flush the same quantity of water, which is either 1.28 or 1.6 GPF.

Read our latest guide about the best one piece toilets.

Benefits and Uses of Two-Piece Toilets

Suitable for Adults and Tall People

A two-piece toilet is larger than a one-piece toilet. It would require more footage in the bathroom as compared to aTop 15 Best Two-Piece Toilets in 2019 one-piece toilet, but it has the added advantage that it can be more convenient to use by adults as well as tall people. The height of the two-piece toilet is higher as compared to the one-piece ones. However, it is a moderate height, and this also helps tall people and adults use it more conveniently. The one-piece toilets are more suitable for the disabled and the kids.

Cleaning and Maintenance

Two-piece toilets by being composed of two different units have a disadvantage here as compared to the one-piece toilets. The reason is that there are lots of hooks and crannies in the two-piece toilets where mold build up might occur ad germs and other particles could start residing in them. However, this can be compensated by the user making sure that these areas are cleaned properly and not neglected. This way, al the dirt which is hidden would be drained out and cleaned. Once these precautions are taken, the two-piece toilet could be as clean as a one-piece one.

Read our complete guide about the best corner toilets.

Replacement of the Damaged Portion

With a two-piece toilet, if the flush tank part of the toilet is damaged or out of order, only that part would need to be changed. In the case of the one-piece toilet, if one part of the toilet is damaged beyond repair, the entire one-piece toilet would need to be changed. This becomes a financial burden as the one-piece toilets are more expensive as compared to two-piece ones.  As such, the two-piece toilets are not just better in terms of affordability; they are also beneficial when only one part of the two-piece toilet gets damaged and needs to be replaced.

Installation

Many people install toilets themselves and do not call a plumber or outside help. The user, however, needs to follow instructions properly and needs to know the rough-in. The one-piece toilets are harder to install as compared to two-piece ones. As two-piece toilets come in 2 separate parts, it is easy to install this one by one after following instructions. The one-piece ones, on the other hand, are hard to handle by one person as they ate heavy. As such, the two-piece toilets carry an advantage in terms of ease of installation.

Affordability

The two-piece toilets have been around in the market for a very long time. As opposed to them, the one-piece toiletsTop 15 Best Two-Piece Toilets in 2019 have been a rather recent addition to the markets. For this reason, and the fact that the design of the one-piece toilets is rather advanced, they tend to be more expensive as compared to the two-piece toilets. As such, the two-piece toilets are cheaper and more people purchase these due to their affordability. While the maintenance cost of the one-piece toilets night is lower in the long run, the upfront payment which the user has to give for the toilet is lower in the case of the two-piece toilets.

Mix and Match

The two-piece toilets allow the users to mix and match both the designs and the colors of the two pieces of the two-piece toilets. This is not possible in the case of the one-piece toilets in which case, only one type, color, or design can be bought. In the case of the two-piece toilets, the user can easily select one part of one color and the other color for the other part. The same is true for design as well. The two-piece toilets allow the user to act as decorators while choosing the two parts of the two-piece toilet.

Shipping

The two-piece toilet is easier to ship as compared to the one-piece ones. The two pieces are shipped in 2 separate boxes which are easy to handle during transportation. The single box of the one-piece toilet would be quite big, and thus, it would be harder to handle and take care of. This could also be quite disturbing if the toilet cracks n the way. In the case of the one-piece toilet, all of it would need to be changed while in the case of the two-piece toilet, only one piece would be damaged and changed.

Types of Two-Piece Toilets

The Two-piece toilets differ in design and the use of construction material, but as such, they do not have classifications in terms of function or performance. The quantity of water in the flush tank could be different, and they could be made in a different round or elongated designs.

Features of Best Two-Piece Toilets.

Comfortable Height

The two-piece toilets are ideal for adults and tall people. The best two-piece toilets would always allow a tall user or Top 15 Best Two-Piece Toilets in 2019an adult to sit down and stand up after using the toilet easily. The best two-piece toilets always feature a comfortable height in this respect.

The shape of the Bowl

The best two-piece toilets are designed in such a way that they easily fir small bathrooms as well as powder rooms. Although they require more footage as compared to the one-piece ones, intelligent design in the shape of a rounded bowl could always lower the amount of space they occupy in smaller spaces. For larger spaces, the elongated ones could be used. In fact, in larger spaces, the two-piece toilets would look quite appealing and aesthetic.

Powerful Flush

The best two-piece toilets employ a powerful flush system for water, and different brands employ different types of technologies, including some proprietary ones as well.  The user always has the option of changing the flush tank part of the two-piece toilet if he/she feels that it requires a different color or design or perhaps a more powerful flushing system.

Leak-Proof Connections

The best two-piece toilets are leak proof and even through the flushed water flows from one piece of the unit to another, i.e., from the flush tank to the bowl, and these are connected through the plumbing, yet, the best ones would employ completely leak-proof technology and not allow the water to leak from any of the connections.

Durability

The best two-piece toilets tend to be extremely durable even though the plumbing and the connections between the two pieces would make the toilet prone to mold, bacteria and other dirt build u, yet if the user carries out proper cleaning and maintenance, the best two-piece toilets will last a very long time.

Water savings

Many newer and high-quality two-piece toilets flush water at 1.26 gallons instead of 1.6 gallons and follow EPA’s WaterSense criterion.  This way, on the average, one two-piece toilet would lead to huge water savings as compared to a 1.6 gallon or a 3.5-gallon toilet over one year.

Top 15 Best Two-Piece Toilets in 2020

Picture
Name
Features
Price
Rating
Picture
Name
Feature
Price
Rating
1. KOHLER K-3887-0 Cimarron Two-Piece Toilet
Round-front bowl $$$ 4.8
2. KOHLER K-76301-0 Highline Two-Piece Toilet
Standard 12-inch rough-in and three-bolt installation $$$ 4.8
3. Toto CST474CEFGNo.01 Vespin II Two-Piece Toilet
Skirted design, Universal Height $$$ 4.7
4. TOTO CST744SL#01 Drake 2-Piece Ada Toilet
Water Surface: 10-3/8 Inch x 8-1/4 Inch $$$ 4.6
5. American Standard 270BA001.222 Cadet 3 Two-Piece Toilet
Ever Clean antimicrobial surface $$$ 4.6
6. Kohler K-3818-0 Memoirs Toilet
12″ (30.5 cm) rough-in $$$ 4.5
7. TOTO CST744E#01 Eco Drake Two-Piece Toilet
E-Max 1.28 GPF flushing system $$$ 4.5
8. American Standard 2467.016.020 Cadet Two Piece Toilet
Elongated 16-1/2-Inch rim height $$$ 4.5
9. Toto CST744SF.10#01 CST744SF.10No.01 Drake Two-Piece Toilet
Chrome trip lever $$$ 4.4
10. KOHLER K-3999-0 Highline Two-piece Toilet
3-bolt Installation $$$ 4.3
11. Miseno MNO1503C Two-Piece Toilet
extending out an extra 1-1/2″ $$$ 4.2
12. Zurn Z5562 Two-Piece Toilet
toilet boasts dual flush rates $$$ 4.1
13. American Standard Cadet 3 Toilet
3-WAY WATER DIVERTER $$$ 4.0
14. TOTO Drake Elongated Bowl and Tank
Large water surface $$$ 4.0
15. American Standard 221AA.105.020 Colony Toilet
2 in. flush valve and 2 in. trap-way $$$ 3.9

1. KOHLER K-3887-0 Cimarron Two-Piece Toilet

The two-piece toilet has been designed and constructed with a perfectly versatile look, and it is a part of the KOHLER K-3887-0 Cimarron Two-Piece Toiletmanufacturer’s Cimarron collection.  It has got extremely graceful curves and features highly powerful flush performance. The two-piece toilet boasts the highly innovative flushing technology known as AquaPiston technology, which is a flush engine with a patent.  It delivers extremely powerful and fast plug-free flush.  The toilet is also extremely easy to use as it has got a very comfortable and convenient height.

Design

The two-piece toilet has been designed in such a way that it facilitates a very quick installation. There is a metal bracket located at the bottom of the flush tank which eliminates the need to drill any holes into the tank. This facilitation results in the leak-free performance of the tank, which makes it both high-performing and very durable. Moreover, the design enables aesthetically pleasing looks, and the toilet blends very well with all types of modern and contemporary bathroom settings.

Flush

The AquaPiston flush engine is a part of the highly innovative and patented AquaPiston flush technology.  It lets the water flow into the bowl of the toilet from all of its side, i.e., 360 degrees.  This way, the two=piece toilet delivers a powerful, fast, and plug-free flush for dependable performance and perfect cleaning.

Convenience and Comfort

The height of the two-piece toilet is moderate, and it is extremely convenient and comfortable for tall people and adults to sit on the toilet and get up from it. The height of the toilet is the same as that of a standard chair. This way, the user does not have to manipulate his/her sitting down and getting up routine to fir to the toilet’s requirements.

Water Saving

The two-piece toilet has got a WaterSense label. It follows US EPA’s guidelines and uses just 1.28 gallons of water per flush as compared to the regular 1.6 gallons. This is a 20% reduction over normal usage. Every year, for a single two-piece toilet, this results in a water saving of 16.500 per year when compared with a 3.5-gallon toilet.

Pros

  • The two-piece toilet has been equipped with powerful and innovative AquaPiston flush technology.
  • The toilet is leak-free as there is no need to drill holes while installing it.
  • The toilet has got a WaterSense label which enables huge water savings every year.

Cons

  • Some users require anti-clogging instructions to be provided in case it clogs for some reason.

2. KOHLER K-76301-0 Highline Two-Piece Toilet

The two-piece toilet has been designed and constructed as an efficiently performing and simply designed toilet which KOHLER K-76301-0 Highline Two-Piece Toiletcombines both functionality and style. This toilet boasts a height similar to that of a standard chair, and the bowl has got an elongated design.  This design provides more comfort as compared to the round design.  It also features a concealed tramway providing an extremely sleek look, and at the same time, this design allows for very easy cleaning.  The toilet uses the optimum quantity of water and reduces water consumption.

Design

The two-piece toilet has been designed without making any compromises. The manufacturer has ensured that the toilet design, as well as the bowl cleanliness and flushing power, are pushed to the extreme. The design is such that it enables the cleaning of the nooks and the cronies at the base of the toilet. This keeps the toilet fully maintained and enhances its durability.

Flush

The flush technology employed by this two-piece toilet would enable the users to throw away his/her plunger as the manufacturer’s canister flush valve is powerful enough to completely get rid of the clogs and during this process, the water would not even be wasted. The flushing technology employed is a Class Five flushing technology which provides plug-free performance.

Convenience and Comfort

The two-piece toilet has got an elongated bowl design which provides a lot of convenience to the users, especially those who are adults or tall. This provides a lot of comfort and convenience. The height of the two-piece toilet is similar to that of a standard chair, and this facilitates easy sitting down and getting up from the toilet.

Water Saving

The two-piece toilet has got a flush tank which uses 1.28 Gallon water for each flush. This consumption of water does not compromise the performance and enables a water saving of 16,500 gallons every year as compared to a traditional 3.5-gallon toilet flush tank.

Pros

  • The two-piece toilet has got a design which enables easy cleaning.
  • The toilet uses high-performance flushing, which elongates the need for a plunger.
  • The toilet uses only 1.28 gallons for every flush

Cons

  • None

3. Toto CST474CEFGNo.01 Vespin II Two-Piece Toilet

The two-piece toilet has been designed and constructed by TOTO, which is a renowned manufacturer with all Toto CST474CEFGNo.01 Vespin II Two-Piece Toiletfixtures that have to do with the water in the bathroom.   The company is a global leader in this type of technology and products and creates products which allow the user to connect with water in ways that bring richness in the life of the user. The toilet is shipped in more than one box and might even arrive separately.

Design

The two-piece toilet has been designed in such a way that it easily blends into any type of modern or contemporary bathroom decor. It has been manufactured using a skirted design and a trip lever which is finished in Chrome to make it look good in all types of bathroom settings. The height of the toilet is universal.

Flush

The two-piece toilet employs a very powerful Double Cyclone flushing system which is extremely powerful, but it does not consume a lot of water. The water consumption is just 1.28 GPF, which enables a lot of water saving as well.  The SanaGloss ceramic glaze on the toilet does not fit two molds and debris to form on the surface of the ceramic.  This way, for cleaning very little chemicals or water is required.

Convenience and Comfort

The use of this two-piece toilet is such that it offers very convenient and comfortable seating for the user. As the toilet has got a universal height, it allows the user to sit down and get up from the toilet very easy even if the user is an adult or a tall person.  The elongated bowl design also adds to the convenience and comfort of the user.

Water Saving

With water consumption of 1.28 gallons for every flush, the two-piece toilet enables a saving of as much as 16, 500 gallons of water every year as compared to a traditional toilet which consumes 3.5 gallons of water for every flush.

Pros

  • The toilet has got a universal height.
  • The toilet enables a plunger-free cleaning of clogs.
  • The toilet enables a high degree of water saving.

Cons

  • Its installation requires two additional holes which need to be drilled on the floor

4. TOTO CST744SL#01 Drake 2-Piece Ada Toilet

The two-piece toilet has been designed and constructed as an ADA compliant toilet which is so robust and powerful TOTO CST744SL#01 Drake 2-Piece Ada Toiletthat it is suitable not just for homes but also for commercial establishments where the use is much more frequent as compared to home use.  The manufacturer of this two-piece toilet is a global leader in this type of bathroom fixtures. The product has been manufactured with high-quality materials to make it highly durable.

Design

The two-piece toilet has been designed as a closed couple toilet, and it has got a 12-inch rough-in.  The toilet is provided to the user to include the tank with a lid, chrome plated trip lever, fittings, minus the seat. The seat has to be arranged by the user separately. It can be upgraded with a SoftClose seat from Toto, or a washlet could be utilized. The tramway of this toilet has been designed on the computer, and it is fully glazed.

Flush

The two-piece toilet has been equipped with G-max flushing system, which is extremely powerful but quiet. It offers a flushing performance which meets the commercial grade level.  The wide 3-inch flush valve is 1.25 times larger as compared to the conventional 2-inch flush valve which is employed in most toilets.

Convenience and Comfort

The two-piece toilet has been designed to be used by everyone. It is fully compliant with the accessibility guidelines provided by the Americans with Disabilities Act (ADA). At the same time, it fully maintains its sleek and beautiful design. It can be used by people of every capability and age and does not require any additional specialization or adaptation.

Water Saving

The toilet consumes only 1.6 gallons of water for every flush (GPF).  The consumption is much lower than a conventional 3.5 GPF toilet. The unit carries a one-year limited warranty against defects due to materials and workmanship.

Pros

  • The two-piece toilet is compliant with ADA accessibility guidelines.
  • The toilet consumes only 1.6 Gallons of water per each flush.
  • The toilet is equipped with very powerful G-Max flushing technology.

Cons

  • Some users have complaints about the lid.

5. American Standard 270BA001.222 Cadet 3 Two-Piece Toilet

The two-piece toilet has been designed and constructed with a very smart design which allows the toilet to provide a American Standard 270BA001.222 Cadet 3 Two-Piece Toiletvery high performance. The toilet’s design leads to fewer clogs, and the toilet is also quite affordable. The product is made available to the purchaser in a variety of styles which include both round and elongated front bowl design. It has been constructed to have just the right height, and models are available, which consume only 1.28 gallons water per flush (GPF).

Design

The design of the two-piece toilet enables superior performance.  The toilet is extremely durable as it is made out of vitreous china, which is extremely easy to clean.  The design enables both reliability and durability.  The prevention of bacterial build-up also enhances its durability as well.

Flush

The two-piece toilet makes use of very powerful flushes even though the water consumption per flush is very low. The reason behind the powerful flushes is the use of the 3-inch flush valve, which is larger than the 2-inch valve used mostly in many other toilets. It is also equipped with a chemical resistant flapper. The seat for the toilet is not included in the package and needs to be purchased separately by the user.

Convenience and Comfort

The compliance with the accessibility guidelines of the ADA act for the toilet enables it to be extremely conveniently and comfortably used by the disabled people as well. For regular users, it is also extremely comfortable and convenient to use as it has got the right height for people to use. It is easy to sit on and get up from for adults and tall people as well. The surface of the toilet is anti-microbial ad; this helps to prevent mold and bacteria build-up.

Water Saving

The toilet is available in the 1.28 Gallons per each flush (GPM), and with this flow per flush, the toilet saves thousands of gallons of water every year as compared to conventional 3.5 gallons per flush (GPF) toilets.

Pros

  • The toilet is constructed out of vitreous china.
  • The toilet uses a 3-inch flush valve.
  • The toilet is compliant with ADA accessibility guidelines.

Cons

  • Information on the warranty is not available.

6. Kohler K-3818-0 Memoirs Toilet

The two-piece toilet has been designed and constructed to reflect the sophistication of a traditional design which Kohler K-3818-0 Memoirs Toiletserves as a great inspiration for this two-piece toilet design.  It has been crafted with a high degree of detailing and this product is reflective of the stylized lines which wee a common feature in the historically renowned architectural as well as furniture designs. The toilet would fit in those bathroom settings where there is at least some touch of tradition as opposed to contemporary or modern designs.

Design

The traditional design of the two-piece toilet with rich detailing and sophisticated curves means that it would fir those bathrooms that have been designed similarly. It could also look quite good in a very simply designed bathroom as it would act as a touch of tradition in a simplistic and plain setting.

Flush

The flushing capacity is 1.6 Gallons per flush (GPF). The tramway is 2 1/8 inches, and it has been glazed.  The trip lever is a standard one, and it is operated by the left hand. The flush is powerful enough to eliminate clogging and keeps the toilet very clean without letting the build-up of dirt or other matter.

Convenience and Comfort

The two-piece toilet boasts a traditional design with an elongated bowl which is extremely comfortable for adults and is more convenient to use aa compared with toilets with round owl design.  It offers an added room and enhanced convenience and comfort.  The standard chair height of the toilet is another factor which further enhances the comfort and convenience level.

Water Saving

The two-piece toilet flushes only 1.6 gallons of water per flush and this way; it helps to save a lot of water as compared to a 3.5 gallons per traditional flush toilet. This allows the toilet to be eco-friendly and water efficient. The total saving of water every year is quite significant.

Pros

  • The two-piece toilet has got a traditional design with rich detailing.
  • The toilet has a flush capacity of 1.6 GPF.
  • The toilet has got chair height for comfort and convenience.

Cons

  • Information on the warranty is not available.

7. TOTO CST744E#01 Eco Drake Two-Piece Toilet

The two-piece toilet has been designed and constructed by TOTO in the form of a high-profile design, and it has been TOTO CST744E#01 Eco Drake Two-Piece Toiletsturdy enough to not only serve the users homes but is also strong enough to be used at a commercial establishment. It can bear frequent use at these commercial establishments where its flushing system needs to be very powerful to enable the toilet to remain clean all the time.

Design

The toilet is designed in such a way that it contains a bowl and tank set along with a tank-to-bowl gasket and other necessary hardware for connecting the two and toilet bolt caps. The elongated toilet design is close coupled with a 12-inch rough-in.  The trip lever is chrome plated, and it does not include the toilet seat. The design fits all types of bathroom settings.

Flush

The two-piece toilet has got alow water consumption and utilizes a siphon jet flushing technology.  THe TOTO’s E-max flushing system boasts a 3-inch flush valve instead of the regular 2-inch valve found in many traditional toilets.  The siphon jet os extra large and so is the tramway.  All of this feature combine to create an extremely powerful cleansing flush.

Convenience and Comfort

The two-piece toilet is extremely convenient and comfortable, especially if the separate SoftClose toilet seat is purchased separately and added to it. It would not slam on to the toilet and enhance the comfort and convenience level of the toilet.  The elongated nature of the toilet also adds both comfort and convenience as it adds an extended room to the toilet.

Water Saving

The two-piece toilet carries the WaterSense label, which means that it is compliant with US EPA standards for water consumption and conservation. It also meets the standards set by California’s CALGreen CEC. It flushes 1.28 gallons of water per flush (GPF) and still, the flush is extremely powerful. This saves 16,500 gallons of water yearly in comparison to a traditional 3.5 GPF toilet.

Pros

  • The toilet carries the WaterSense label.
  • The toilet has got a very powerful flush.
  • The toilet can be used at commercial establishments as well.

Cons

  • Some users find the water flow inadequately.

8. American Standard 2467.016.020 Cadet Two Piece Toilet

The two-piece toilet has been designed and constructed with vitreous china. It is equipped with a pressure-assisted American Standard 2467.016.020 Cadet Two Piece Toiletand gravity-fed flushing system which boasts a flushometer valve for a powerful flush.  The product offers low consumption, high efficiency for commercial bot applications. It is an elongated toilet which allows extended room to make the user comfortable.

Design

The two-piece toilet is made out of Vitreous China and has got a white finish. The bowl design is oval and elongated, which means it provides more room to the user for both convenience and comfort.  The product is 35 x 35 x 24 Inches after it has been assembled on the bathroom floor. The toilet boasts great [performance and marvelous looks and the design are such that it would fit all modern and contemporary bathroom design settings.

Flush

The two-piece toilet uses 1.6 gallons for every flush (GPF). This is a lower consumption as compared to the consumption of traditional toilets. However, the flush is very powerful. The Cadet 3 flushing system is enabled with a 1 1/8 inch glazed trapway while the flush valve has got a large size of 3-inches. This is better than the 2-inch regular valve used in the traditional toilets.

Convenience and Comfort

The two-way toilet has got a ComfortHeight design, which means that its 16-1/2-Inch rim height is extremely convenient and comfortable for most people regardless of their height. It is extremely easy to sit on this toilet and to get up from it. The user would need to add a seat to the toilet to complete the set.

Water Saving

The two-piece toilet has got a water consumption of 1.6 gallons per flush, which when compared to the traditional; 3.5 gallons per flush requirement for traditional toilets enables huge water saving every year. The flush technology ensures that even with this low consumption, the flush is powerful enough to prevent clogging.

Pros

  • The two-piece toilet is constructed out of vitreous China.
  • The toilet has got a comfortable height for sitting on it or getting up from it.
  • The toilet consumes only 1.6 gallons per flush (GPF).

Cons

  • Some users think the powerful flush is noisy.

9. Toto CST744SF.10#01 CST744SF.10No.01 Drake Two-Piece Toilet

The two-piece toilet seat has been designed and engineered by TOTO, which is world renowned for making Toto CST744SF.10#01 CST744SF.10No.01 Drake Two-Piece Toiletextremely aesthetic looking fixtures for bathrooms. The company is a global leader in this type of technology. Its products connect the user with water in ways that bring comfort and convenience to the user besides filling his/her life with rich experiences.

Design

The two-piece toilet has been designed using the extremely powerful G-Max siphon jet which enables it to provide a higher level of flow, and it also draws water into the bowl extremely quickly and with a lot more force. The toilet is ADA accessibility guidelines compliant, and no extra specialization or adaption is required. It is also compliant to California Proposition 65.

Flush

The two-piece toilet utilizes the G-Max flushing system with a computer designed glazed trapway.  The flow of water released per flush is 1.6 GPF. The toilet is inconsistent with a low-profile tank along with an elongated bowl design which facilitates the user and makes it more comfortable to use as compared to round design.

Convenience and Comfort

The two-piece toilet has got a universal height, which is the same as the height of a standard chair. This type of height is very useful as it allows all types of people to sit n the toilet and get up from it extremely convenient and comfortable. The elongated design of the bowl also enhances the level of comfort and convenience as the space to be used is extended.

Water Saving

The two-piece toilet uses only 1.6 gallons per flush (GPF) water as compared to traditional toilets, which used 3.5 gallons per flush (GPF).  This water saving is huge when measured over a whole year and runs in several thousand gallons of water.  As such, the toilet is water-efficient and eco-friendly.

Pros

  • The two-piece toilet consumes only 1.6 gallons per flush (GPF).
  • The toilet is ADA and California Proposition 65 compliant.
  • The toilet has got a 10-inch Rough-in.

Cons

  • Some users have doubts about the rough-in being 10-inches.

10. KOHLER K-3999-0 Highline Two-piece Toilet

The two-piece toilet has been designed and constructed to provide exceptional performance to the user as well as KOHLER K-3999-0 Highline Two-piece Toiletexceptional value for the user’s money spent.  The company has been manufacturing bathroom fixtures since 1936, and its name is synonymous with a high level of performance couple with innovation.  The new toilets were designed in 2011, and they are now more elegant and go well with all types of bathroom settings.

Design

The two-piece toilet has been designed to look extremely elegant in the bathroom, and it goes very well with contemporary and modern bathroom settings. It would fit even those that have got a traditional touch. The toilet has got all the right features, which include bowl cleanliness, powerful flushing, as well as an elegant toilet design to become a leading-edge product of its time.

Flush

The flush valve used in this two-piece toilet is Kohler’s cannister flush valve which provides extremely powerful flushes, and this way, the clogs get eliminated without the toilet consuming too much water. The flushing is Class Five flushing which offers best-in-class cleanliness due to bulk-waste flushing performance.

Convenience and Comfort

The comfortable height of the two-piece toilet allows all types of people, including adults and tall people to easily sit on the toilet and get up from it when done. The toilet also adds convenience and comfort due to its elongated bowl design which offers more room to the user. The pre-installation bolts allow the user to save time during installation.

Water Saving

The two-piece toilet consumes only 1.28 gallons of water per flush (GPF) which allows it to save at least 16,500 gallons of water yearly in comparison to a 3.5 GPF traditional toilet.  This makes the toilet water-efficient and eco-friendly.  It helps optimize the water bill, and despite the low consumption, its flushing technology ensures perfect cleanliness.

Pros

  • The two-piece toilet has a very low water consumption per flush.
  • The powerful flushing technology ensures bowl cleanliness
  • The installation is facilitated by the availability of 3 pre-installed tank bolts.

Cons

  • Some users think the flushing power is not adequate.

11. Miseno MNO1503C Two-Piece Toilet

The two-piece toilet has been designed and constructed to go well with contemporary and modern bathrooms. Its Miseno MNO1503C Two-Piece Toiletdesign is such that it would fir those that have a touch of tradition as well. The toilet is ADA accessibility guidelines compliant and does not require any adaption or further specialization in this regard.  It comes along with a toilet seat while most toilets in the market are sold without one, and it has to be purchased separately.

Design

The two-piece toilet has been designed to boast a molded toilet seat and is made available to the user along with a bolt kit as well as a wax ring to carry out the installation. No outside plumbing help is required for this easy installation, and it can easily be DIYed.  The tank lever is chrome polished, and there are many styles and finishes available as options. The toilet is easy to move as it is two pieces, and therefore, the installation is made easier.

Flush

The two-piece toilet has got a high-permeance 3-inch flush valve system which is much superior in performance to a -inch flush valve system available in traditional toilets.  It is WaterSense certified, which means it consumes water at a very low rate and uses 20% less water as compared to even a 1.6 Gallons per flush (GPF) toilet. It carries a lifetime limited warranty for the materials used in it and a 5-year warranty for the parts.

Convenience and Comfort

The elongated bowl design of the two-piece toilet provides a high level of convenience nd comfort to the user due to the extended room available to him/her.  The toilet extends out at least 1.5 inches more as compared to round toilet bowl design. The toilet is also compliant to AD Accessibility guidelines and does not require additional specializations or adaptations to make it ADA compliant as it already is. This makes it comfortable and convenient for the disabled as well.

Water Saving

The WaterSense label of the two-piece toilet ensures that it is compliant with the US EPA guidelines and consumes only 1.28 gallons per flush of water as compared to 1.56 GPF of most modern toilets and 3.5 gallons of water consumptions per flush of the traditional toilets.  This shows that while it is 20% more effective in terms of low water consumption against the 1.6 GPF toilets, it is 2.73 times better than a traditional 3.5 GPF one in this respect.

Pros

  • The toilet has got a WaterSense label.
  • The toilet design is ADA compliant.
  • The toilet has got a 3-inch high-performance flush valve.

Cons

  • Some users are not happy with its finish.

12. Zurn Z5562 Two-Piece Toilet

The two-piece toilet has been designed and constructed to boast a 1.6 GPF or even 1.0 GPF flush rate. The toilet Zurn Z5562 Two-Piece Toiletexhibits a high level of performance, and it is highly efficient as well. The construction material is Vitreous China and the technology used in the toilet is a pressure-assisted tank and very high-performance EcoFlush technology.  The efficiency of the toilet is so high that it helps to reduce potable water consumption by as much as 30%.

Design

The design of the two-piece toilet is a part of the EcoVantage™ Series which employs dual flush rates in the same toilet. The pneumatic handle of the tank, which is chrome-plated is extremely easy to actuate and the flush despite being quite powerful, is still very quiet.  The pressure range within which the system works perfectly is between 15 psi to 125 psi.  The front rim of the bowl has been elongated to make the user feel more comfortable.

Flush

The dual flush technology allows flush rates of 1.6 GPF and 1.0 GPF. The latter is an extremely low water consumption rate.  The unit has got a trapway of 2 1/8 inches, and it has been fully glazed.  The system boasts a large water surface area enabling a higher level of cleanliness. The installation is facilitated by the availability of the bolt caps in the package.  The shipping weight of the two-piece toilet is 8 lbs. The rough-in is 12 inches.

Convenience and Comfort

The user is facilitated greatly in using the toilet. While most other two-piece toilets do not come with a seat and lid, this unit has got a closed front toilet seat along with a cover. It has white finishing. The lid of the tank is also vandal proof as it has a locking system. The toilet seat has got a cover which is connected with a check hinge made out of stainless steel. It also comes along with a convenient standard stop with a flexible closet riser.

Water Saving

Both the flush rates available in this two-seat toilet allow for huge water savings. The 1.6 GPF rate saves a lot of water as compared to the traditional 3.5-gallon per flush toilet, and the 1.0 GPF rate is even better than WaterSense labeled toilets with a1.28 GPF rating and which save 16,500 gallons of water every year in comparison to traditional toilets. The toilet is highly water-efficient and eco-friendly.

Pros

  • The two-piece toilet is apart of the manufacturer’s EcoVantage™ Series.
  • The toilet boasts dual flush rates.
  • The toilet comes with a seat and cover.

Cons

  • Some users have issues with their base.

13. American Standard Cadet 3 Toilet

The Cadet 3 two-piece toilet has been designed and constructed to allow to deliver very high performance with as few American Standard Cadet 3 Toiletclogs as possible. All of these qualities are made available to the user at an affordable price.  The toilet is available in various types of styles in round or elongated form. The elongated ones are more comfortable and convenient for the user as they have got extended room which facilitates the user.

Design

The two-piece toilet has been designed in an elongated form to enable ease of convenience for the user. The various styles available in this model include the ones with the right height. This is the standard chair height, which makes it very easy for the user to sit on the toilet and get up from it regardless of the height of the person. The most water-efficient model has an aflush rate of 1.28 GPF.

Flush

The flush rate of the most efficient model in this line is 1.28 gallons per flush) GPF). At this rate, the user can save at last 16,500 gallons of water annually as opposed to the consumption level of a traditional 3.6 GPF traditional toilet. Despite the low consumption, the flush is very powerful and does not lead to clogs. The unit uses a 3-inch flush valve as compared to the 2-inch ones used in the traditional toilet.

Convenience and Comfort

The two-piece toilet is extremely easy to install, and no outside plumbing expertise is required to accomplish the task. The toilet has got the right height enabling all types of people to use it very conveniently and comfortably. The installation of the unit is also quite easy, and no outside plumber assistance is required.

Water Saving

The model is available with different flush rates, and the lowest one available is the level of 1.28 Gallons per Flush (GPF). The water consumption is very low as compared to the traditional 3.5 GPF toilets or even the newer and highly efficient 1.6 GPF toilets.  The ability to save water without compromising on the power of the flush makes this toilet water -efficient as well as eco-friendly.

Pros

  • The Cadet 3 is a highly efficient modern two-piece toilet.
  • The toilet is extremely easy to install.
  • The toilet is available in the right height to ensure convenience for all types of users.

Cons

  • It does not include a seat.

14. TOTO Drake Elongated Bowl and Tank

The two-piece toilet is a commercial grade model which is perfect for commercial establishments where there is TOTO Drake Elongated Bowl and Tankfrequent use of the toilet, and the flush needs to be very powerful to ensure that there is no clogging.  It combines the traditional toilet design with the manufacturer’s modern and extremely powerful G-Max flushing technology which produces very powerful flushes to keep the bowl clean at all times.

Design

The two-piece toilet is produced after combining a bowl with a tank. The seat is not included in the model and has to be purchased separately. The user can choose to purchase a SoftClose seat or WASHLET. The SoftClose seat would ensure that its cover would never slam on the seat and it would be very safe and convenient to use.  The toilet is high-profile and is a close coupled toilet in an elongated shape for user convenience.

Flush

The two-piece toilet has got a 12-inch Rough-in, and its flush rate is a low consumption flush rate. It is only 1.6 Gallons per Flush (GPF) and consumes very little water as compared to traditional toilets. The flushes are extremely powerful despite being produced with a very low quantity of water. The technology behind the powerful flushes is the siphon jet flushing action, which ensures that despite the low quantity of waste, no clogs are formed.

Convenience and Comfort

The convenience and comfort for the user are ensured in the design of this unit, which allows all types of people to sit on it and get up from it with ease. It also manages to stay generally clog-free as a result of the G-max flushing technology it utilizes to send powerful flushes to clean the bowl. The flushing performance is commercial grade, so the user is always satisfied with its cleaning performance.  The installation is also fairly easy to accomplish.

Water Saving

The 1.6 GPF flush rate of the product produces a lot of saving as compared to using the traditional toilet with a 3.5 GPF flush rate. The low flush rate is, however, accompanied by an immense force which helps to keep the bowl clean.  Therefore, the system is highly water-efficient and eco-friendly and performs second only the 1.0. 1.1 and 1.28 GPF systems.

Pros

  • The toilet has got a very low rate of water consumption.
  • The toilet has a commercial grade capability.
  • The toilet is quite elegant and fits all types of bathroom settings.

Cons

  • Some users think that the flush assembly needs replacement after three years or so.

15. American Standard 221AA.105.020 Colony Toilet

The two-piece toilet has been designed and crafted to look extremely beautiful and at the same time, be completely American Standard 221AA.105.020 Colony Toiletreliable and durable.  The toilet can bear the rigors of everyday use as it is made out of the robust vitreous china, and it employs flushing technology based on the siphon action bowl with a directly fed jet. The flush valve is a standard 2-inch one, and it performs perfectly well over long periods.

Design

The two-piece toilet is available in a variety of styles, and this way; the user can always choose the one that is more suitable to his/her home bathroom settings. The toilet has got a timeless look as it has got a classic touch. The design coordinates very well with the other products in the bathroom collection produced by the manufacturer.  Besides the sophisticated, classic design, the toilet has got very efficient and convenient features as well.

Flush

The two-piece toilet is a low-profile toilet with a flush rate of 1.28 gallons per flush (GPF).  This flush rate enables a 20% reduction in the consumption water as compared to the toilets that use a flush rate of 1.6 GPF. When this flush rate is compared with that of the traditional toilets which flush at the rate of 3.5 GPF, the water savings in one year could amount to 16,500 gallons. With each PowerWash flush rim cleanses the bowl to ensure perfect cleanliness.

Convenience and Comfort

The two-piece toilet has got a taller Right Height design, which is extremely comfortable and convenient for tall people. It is quite easy for them to sit down on the toilet and also to get up from it. The elongated bowl design also ensures that the user gets more convenience and comfort as an extended room is made available to the user. It is also easy to install the toilet without needing a plumber.

Water Saving

The 1.28 gallons per flush rate allows the toilet to comply with the one of the lowest  ratings related to water consumption  This low rate of flush is, however, compensated by the powerful flush technology employed by the product. Regardless of the low consumption, the toilet bowl is kept clean, and even the rim is perfectly scrubbed.

Pros

  • It has a very low rate of water consumption.
  • The flush scrubs the rim side as well and keeps it perfectly clean.
  • The taller Right Height enables it to be conveniently used by tall people as well.

Cons

  • Some users think the flush is a little noisy.
error: Content is protected !!