You might not take it seriously, but even a small leakage in the piping system is enough to cause a catastrophe in your home. From a pipe bursting to leaky water heaters – repair can make you spend thousands of dollars. Fortunately, many best water detectors are available which not only checks the leak but also shuts down the water supply automatically. Their usefulness cannot be overlooked because it helps in averting significant dangers and keeps the inmates safe and sound. Though these water sensors are not cheap, they will cost less than the flood insurance. In a world where Smartphones are dominating the life of the people, buying a smart device as a measure of precaution is the right step.
- Advantages of buying a water detector
- Features of a water detector
- Top 15 Best Water Detectors in 2019
- 1. Flume Smart Home Water Sensor – Monitors Water Usage and Lawn Sprinklers – Leak Detector – No Pipe Cutting, Easy Install, Wi-Fi
- 2. Wi-Fi water Level/sump monitor Sensor with buzzer, email/ Text Alerts
- 3. Wi-Fi Water Detector with Buzzer and Email / Text Alerts
- 4. Water Alert with Text Message and Email Notifications (Rugged) by MySpool
- 5. D-Link Wi-Fi Water Leak Sensor and Alarm, App Notifications, Battery Powered, No Hub Required (DCH-S161-US)
- 6. Gizmode The Water Screamer Loud 130 dB Siren Water Alarm Loud 130 dB
- 7. Water Leak Detector – 3 Pack, Fosmon Wireless [72 Hours Alarm | Low Battery Alert]
- 8. 4 Pack Water Leak Detector – 95 Db Flood Detection Alarm Sensor for Bathrooms, Basements, and Kitchens by Mindful Design (White)
- 9. First Alert WA100-3 Water Alarm for Leak Detection and Flood Alerts, 3-Pack
- 10. Topvico Flood Alarm Water Leak Sensor Detector 130dB Work Alone Home Security 3 Pack
- 11. Smart Wi-Fi Water Sensor, Flood, and Leak Detector – Alarm and App Notification Alerts, No Expensive Hub Required, Simple Plug & Play by Wasserstein
- 12. Instapark IN07A Battery-powered Stand-alone Water Leakage Detection Alarm and Sensor, 130 dB
- 13. Aeotec Water Sensor 6 Z-Wave Plus Flood Sensor, Freeze, Leak & Temperature Detector Water Sensor
- 14. Masswell Water Leak Detector, Up to 120 DB, 72 Hours, Louder Sound, Longer Alarm Detection Sensor for Perfect Protection of Your Belongings, 3 Pack
- 15. FIBARO HomeKit Flood Sensor, Water & Temperature Sensor for HomeKit only
Advantages of buying a water detector
You cannot overemphasize the use of leak detectors because apart from protecting your home, it saves lives. Investing in such a detector will prove profitable in the long run because the ROI you reap is unmatchable. Here are a few benefits of buying this smart device for your smart home.
Reduces the water bill
According to research, close to 30% of the water running through the various distribution system is lost due to leaks in pipes. Putting a stop to these leaky pipes will automatically reduce the overall cost of the water bill. With the shortage of water beginning to hit the world, a water sensor will save water and reduce the water bill.
Safeguard the house
There is nothing wrong in being selfish about the security of your family. A burst in any water pipe can cause potential injury and ruin the costly plush carpeting and leather furniture. Using a water detector will help in protecting the house from unprecedented events.
When you install a water detector, you reduce the chances of coming home to a flooded house. Though it may seem like an extravagant device, the money you spend on it is worth every penny because the cost of replacing items damaged due to water is much higher.
Contribute to the environment
Just when water is becoming scarcer due to the exploding population and drying up of acquirers, the last thing you would want is to leave a leak in a pipe untreated. The sooner you detect the leaks, the more you will contribute to the environment and so justice to your bank balance.
Protect the neighboring properties
You need to think about the properties of the neighbors because a leak that can cause full bore flooding might overspill into the adjacent properties. A water leak detector can prevent plausible flooding and keep the neighborhood safe.
Features of a water detector
After understanding the advantages, it’s time to look at the factors to consider before buying the best water detector. However, you might be surprised at the diverse ways of finding out the place of leakage. With a plethora of options available in the market, it becomes a daunting task to select the one you need. While some detectors work on Wi-Fi others, require a hub to communicate. To make your life easier, here are a few specifications worth noting.
As stated earlier, some detectors require a new hub which means extra spending because without the hub connectivity will remain an issue, and the indicator will not work as desired. Though connecting the sensor with the hub will add an extra layer of security, you might have to struggle initially. Therefore, carry out proper research before selecting a sensor.
You will come across sensors which are both plug-in and battery operated. The former requires a plug location nearby whereas in the latter you have to replace the battery now and then. Battery operated sensors are advisable because they will work even when there is a power outage, and you can install them at any possible location.
Before buying a water detector finalize the place where you will place the device. The bulky sensors usually never compliment the home décor. And, if you want to place the detector in a tight space, you need to focus on the size. Detectors are usually available in two types: cable and spot sensors.
Spot sensors– the spot sensors are also called as stand-alone sensors and can be placed at only one point. Due to this reason, many people place a couple of sensors at prominent locations in their home.
Cable sensors– the ability of the sensors is limited to the length of the cable. It can detect moisture and water leakage at many locations.
Weigh your options before deciding on the type of sensor you want.
With the growing penetration of technology, we are becoming more and more dependent upon the internet and Smartphones for everything. But, can you use technology when a storm disrupts internet services or electricity? No. A built-in alarm in a battery operated water detector is what will come to your rescue. Apart from a built-in alarm, the sensor should feature a small LED light which glows on detecting water leakage. This is important because, during the storm, the sound of the alarm may get overshadowed, but the glowing of the LED light will avert a potential disaster.
Water detectors come with different sensors, and they work like icing on the cake. It’s always great to have a sensor which keeps track of the humidity and the temperature because both the situations can result in untimely bursting of the water pipes. Therefore, choose a detector which offers these basic sensors; otherwise, you will end up spending more on buying additional sensors.
Even the best water detectors will not last for a lifetime. Every device loses its efficiency over time, and water detectors are no different. Traditional, the life of such a sensor is 5 years, though many detectors boast of working up to 10 years. The durability is dependent upon the material from which it’s made. For example, water detectors made from metal are prone to rust, and if the rust seeps in the water, it can result in many diseases and infection. One of the most durable detectors is made from resilient plastic which is not prone to wear and tear even after rough use.
Auto shut-off mechanism
A feature which is often overlooked by homeowners is the auto shut-off mechanism of the water sensor. During a critical leak, there is no point receiving a message on the Smartphone because before you can take action, the disaster would have taken place. But, if the detector features an auto shut-off mechanism, the sensor will automatically shut down all the water supply. Furthermore, some water detectors may let you add a water usage limit which shut off the supply when excess water is used.
Smart home integration
What can be more enthralling than a water detector working in coordination with smart home systems such as Google Home or Alexa? Though this a desirable feature, the presence of it will help you monitor the home from anywhere. When the detector features smart home integration, it allows the smart devices to a flashlight or make a sound on detecting water leakage in the house.
After understanding the features to consider, it’s time to take a look at the best water detectors in the market.
Top 15 Best Water Detectors in 2019
1. Flume Smart Home Water Sensor – Monitors Water Usage and Lawn Sprinklers – Leak Detector – No Pipe Cutting, Easy Install, Wi-Fi
Water detectors are as essential as smoke or carbon monoxide detectors, and the Flume Smart Home water sensor is no different. To install the sensor, you only need a water meter, a Wi-Fi connection, and an Android or iOS device. You will not face any issue while installing the detectors because it’s compatible with 95% of the water meters. It will work on both indoor and outdoor water meter. At an affordable price, it’s your best bet possible.
Flume water detectors offer simple installation and operate with four lithium-ion AA batteries which have a life expectancy of close to two years. You can quickly locate it up to one-thousand feet from the Flume bridge. A bridge is a connection between the Wi-Fi network and the water sensors. The information related to water leakage is saved on the cloud and available on the Mobile App. Furthermore, you can strap the detector on the water meter.
Superior leak detection
With Flume detector, protect your home from potential water damage. You can monitor, control the water usage and set a limit to restrict the excess usage of water. Furthermore, the Flume app provides real-time leak detection notification on the app throughout the day. The app also includes information related to water usage so you can understand where and what is using the maximum water. It instantly sends a notification when an issue is detected.
The app supports multiple flume leak detection features. You can install the sensor at your primary residence and the vacation home. Using the app, you can switch between the homes and monitor the possible usage of water.
Reduction in the water bill
Flume water sensors monitor water consumption for the entire home including the water used by the outside sprinkler. It catches water leakages and helps you understand the water usage to conserve water. It will help you reduce the water bill.
- Reduces water bill
- Easy to install
- Lack of smart home integration
- Potential problems with the bridge
The Wi-Fi enabled water level sensor from Proteus is an ideal solution for your home and business. The sensor will protect your home from flooding as the buzzer goes off when a required water level is reached. Apart from featuring a local audible buzzer, you can send text messages to multiple phones and email addresses. At an affordable price, you can access the water level through your computer or Smartphone.
When you buy the sensor, it comes in a small box with a 25’ of the cord. The sensor can be plugged in a USB AC outlet plug. The sensor is a float-style device, and it comes along with a zip tie attached for easy installation. After the device is connected to Wi-Fi, you can create a cloud account. After creating a cloud account, set the device to notify via text or email about flooding or water level reaching a critical point.
Apart from the water-level sensor, it features a moisture-detecting probe sensor which prevents false notification. The sensor is ideal for a sump hole and similar environment. Furthermore, the moisture sensor works excellent in a setting near the washer or sinks which is usually not wet.
It features 802.11b/g Wi-Fi which provides fantastic connectivity to any internet network. Using a web browser, you can access the detector on the go. You will never need to install any app. Furthermore, send alerts to as many phone numbers as possible.
Furthermore, due to cloud connectivity, it becomes easier to monitor the water level throughout the day. All in all, the cloud based platform is self-explanatory and extremely simple. Using one detector, you can connect 5 sensors.
The company provides free monitoring service which is an added advantage and for the price you pay it’s worth every penny because it will help you prevent a major flooding disaster. With the water detector, the company sells different devices such as the motion sensor, door sensor, and many others. Get an alert within seconds.
- Easy installation
- Great customer support
- Reliable water sensor
- Cloud support
- Potential working issues when the power goes out
The water detector from the innovative house of Proteus is designed to alert and detect potential water damage in your home, basement or office. When the water level reaches a dangerous mark, it automatically sends an alert, thereby averting a major disaster. Even when you’re holidaying, using the Wi-Fi feature you can monitor the sensor and take actions remotely. In short, this one device is likely to simplify your life and protect your home from unforeseen water issues.
When it comes to installation, most of the products by Proteus requires less than 2 minutes. Setting up and connecting the Wi-Fi is simple and easy. Furthermore, it features a long 5ft cord which helps you place the detector at a desirable location. You can connect the device to either your home or office Wi-Fi as it requires no gateway or hub for connection. To avoid the hassle of buying batteries, the detector is a direct plug-in into a wall outlet.
Water level detection
Proteus water alarm can detect water as low as 1/16”. You can send text or email to multiple phone numbers and email addresses – a feature which is unique to Proteus.
Using a splitter, you can connect different sensors and ensure that your home is protected against every type of unforeseen incident.
It features 802.11b/g Wi-Fi which provides fantastic connectivity to any internet network. Using a web browser, you can access the detector on the go. You will never have to install any app. Furthermore, send alerts to as many phone numbers as possible. All in all, the cloud-based platform is self-explanatory and extremely simple. Using one detector, you can connect 5 sensors.
The company provides free monitoring service which is an added advantage and for the price you pay it’s worth every penny because it will help you prevent a major flooding disaster. It features a smart audible alert which you can turn on/off after a few minutes.
- No batteries
- Easy to install
- Requires an active Wi-Fi
The smart water sensor from MySpool is your one-stop solution to protect your home from potential water damages. The sensor is inexpensive, great and easy to use. You will never repent your decision of buying the water alert from the innovative house of MySpool.
The design of the sensor is such that is doesn’t require any hub. The company offers a 6 feet long power cord which is connected to an enclosure with a transmitter. The water alert and the enclosure are connected using a set of wires which are over 2 feet long. This helps in placing the alert at areas which are usually inaccessible. It also features a hardened sensor with a 5 feet wire. Furthermore, the surface is nickel coated to prevent corrosion due to water. It also features a rugged enclosure which supports up to 300 lbs. The device will send alerts even in dusty and moldy conditions.
Unlike other detectors, installation is a tricky part because it requires you to complete a series of instructions. First, you have to connect your device, then create an account on the website and finally configure your phone number and email address. Once the device detects water, it will send you text, email or push notification via the Wi-Fi network. Furthermore, the device will retain all the configuration even if there is a power outage.
It features a built-in siren which sends alert when the water is detected by the sensor. The alert the sensor sends is either in the form of text messages, email notification or both. Furthermore, the sensor keeps sending messages until the sensor is dry. The water alert sends a notification with the help of the Wi-Fi network. The company has successfully tested over 400 feet from a Wi-Fi router and even through the walls. The siren is loud enough to be heard by the neighbors.
No extra cost
The device requires no hub and the water sensor works independently with the help of a Wi-Fi network. As the sensor doesn’t require any hub, you can place the device anywhere in the house.
- Easy to use and reliable
- No apps to install
- Great customer support
- Painful installation process
5. D-Link Wi-Fi Water Leak Sensor and Alarm, App Notifications, Battery Powered, No Hub Required (DCH-S161-US)
D-Link Wi-Fi detector is an efficient smart sensor which is designed to protect your house from flooding and water damage. The pocket-sized device can be placed near the washing machine, sump pump, water heater, dishwasher, and refrigerator and even under the sink. With DCH-S161-US, no leak is out of your reach, and you can live peacefully without worrying about the financial losses due to flooding. At an affordable price, you buy a reliable and durable water alert.
It features a 5.9 ft water detection sensor cable which helps you place the sensor at any location. Setting up the sensor is extremely easy because you have just to download the Mydlink app, confirm the registration, put the batteries and you’re good to go. Also, the set up is straightforward because the device requires no additional hub. Furthermore, the sensor quickly detects your Wi-Fi network. In short, it will not take more than 5-10 minutes from unboxing to operation.
Interestingly, the device is compatible with IFTTT which allows you to bring other smart home products and provide an extra layer of security to your home. Furthermore, use the IFTTT recipes to automatically turn your lights on at sunset, or receive email notification of a leak.
The built-in alarm is high-decibel continuous shrill tone which keeps buzzing until the sensor is removed from the water. The 90 DB alarm is loud enough to be heard by the neighbors when there is potential water leakage. Apart from the siren, the sensor will send an alert using an app in real-time on your phone. Furthermore, the detector flashes a bright LED light when it gets submerged in water. However, unlike other detectors, the alarm is not waterproof and can malfunction when it comes in contact with water.
The water alert works on 2 AA batteries which have a life of up to 18-months.
- Easy to set up
- Detects water quickly
- Affordable and durable
- Connectivity issues
- Issues with pairing with the app
When compared to other similar water sensors, the Gizmode water screamer is the loudest one available in the market. From detecting leaky pipes to faulty water heaters – the screamer is capable of sending alerts even for the tiniest amount of moisture it detects. It helps in prevention of molds, mildew and other unwanted algae growth. Place it near bathtubs, under the sink or in the basement – it will provide you with results. The product is reliable because it’s a high-end commercial grade design which is designed for protecting the homeowners against unprecedented water damages. With Gizmode, you get peace of mind because your house will never get flooded.
The sensor features four legs for easy installation. Once the water touches any of the legs, the alarm goes off alerting the homeowner of the water leakage. Interestingly, the pins of the sensor can penetrate the carpeting as well. It can detect water and moisture before it’s too late. Furthermore, due to the size, you can install it within seconds anywhere in your home.
The extra loud siren has a deafening noise of 130 DB. You can hear it from anywhere and can prevent the house from potential water leakages. Even the alarm is small in size; it projects a shrieking noise, which can quickly wake up someone who is in a deep slumber.
It works on the standard 8-volt battery, and you don’t have to replace the batteries now and then because the life of the batteries is long. It also features a built-in additional battery bays for the use of the optional second and third battery.
Water Alarm has given due importance to customer satisfaction because of which the company offers a one-year warranty on the water screamer.
- Extra loud alarm which can be heard even when placed in the garage or the basement
- Reliable and small in size
- Detects even the tiniest moisture
- No indication of battery consumption
The water leak detector is for anyone worried about a small leak turning into a potential disaster. From leaky fish tanks to sinks, from faulty water heaters to malfunctioning sump pumps – the Fosmon water leak detector helps you solve all the water leakage issues. At an affordable price, the water leak detector is your best bet possible.
The Fosmon Wireless water leakage alarm is easy to install, and you can set it up within 5 minutes.
You can place the water alarm anywhere as it will help you detect even the tiniest leak. You can protect your home from the potential leakage by placing it near sump pumps, laundry rooms, washing machines, basements, and even garages. Furthermore, you can place the sensor on the floor or mount it on the wall with included hardware. The length of the sensor wire is 5 ft because of which you can place it at any location.
The detector features a loud built-in alarm which will produce an audible alarm for up to 72 hours depending on the battery life. The volume of the alarm is 120 DB at zero meters and 100 DB at 3 meters.
It uses a single 9V bolt battery which has a long life. The alarm will beep after every 60 seconds and send you an alert when the battery is low. This way you can keep track of the battery and change the batteries whenever necessary.
The devices come with three water sensors which can work at an operating temperature of 32oF to 120oF. You can place the three sensors at different locations and provide an extra layer of security to your home.
- Loud siren
- Reliable and durable
- Low battery indication
- Alarm can keep buzzing for no reason
8. 4 Pack Water Leak Detector – 95 Db Flood Detection Alarm Sensor for Bathrooms, Basements, and Kitchens by Mindful Design (White)
Your search for a reliable and functional water leak detector is over with the sensor from Mindful design. Due to the discreet and compact design, you can place the detector even at the tightest spot. With the innovative features of Mindful design, you can detect the leaks throughout your home starting from the bathroom, kitchen, attic, laundry and even the garage. You can place the sensor in all the areas which you need the most. Some of the best places to keep the 4 pack water leak sensor is near the sump pumps, basement, water filtration units and near new plumbing.
Apart from being easy to install, the alarm is excellent for medium to large homes. You will not spend much time on installing the detectors at a different location.
The innovative design helps in detecting different types of leak issues such as dripping water, pooling water, and even a high amount of moisture in the environment. Furthermore, due to the small size, you can easily tuck it away in any space. You have a lot of color options to choose from which will match your placement location. Keep your home tidy with these useful sensors.
The detector features a loud 95 DB alarm on each of the four detectors. Furthermore, the loud alarm can easily carry throughout your home and provide instant notification at the first instance of water leakage.
It works on a single 9V battery which has a long life.
The alarms from Mindful design are reusable which allows you to save money on buying disposable siren again and again. These alarms are designed to be reused. Once if the alarm is triggered, you can dry it off if wet and change the batteries if needed.
- Easy installation
- A variety of colors to choose
- Compact design
- Inconsistent sound of the alarm
With First Alert WA100-3 water alarm, you can not only protect your valuable items but also remain at peace while in office or on vacation. The alert comes in a pack of three and can be placed at any location including washing machine, toilets, basement and any other place susceptible to leakage. Each water sensor is water and splash resistant because of which you can place the device 6 feet away from the siren unit. At an affordable price, you protect your home from physical damage and your family from financial losses.
The built-in alarm is one of the USP of the First Alert because it emits a loud 85-decibel sound on detecting water leakage. The loud siren can be heard by the neighbors who can come into action as soon as possible. Furthermore, the alarm will continue to send alert up to 72 hours if it’s not silenced. It’s an excellent device for early detection of leaking appliances and preventing flooding.
The device is powerful enough to work under wet conditions using batteries. It sends out alert even in wet conditions. Each of the alarm uses a 9-volt battery and can efficiently operate in a temperature range varying between 32oF to 120oF.
You can place the First Alert water alarm in the basement, laundry room, bathrooms, water heater, sump pumps and even in the garage. It helps in detecting unwanted water which starts accumulating in the house.
It features two sensors which require moisture to come in contact to activate the siren. The device features two metal sensors, and the moisture should come in contact with both.
The company takes pride in the devices it manufactures because of which it offers a 2-year limited warranty on the water alert.
- Loud siren
- Easy to replace the battery
- Reliable and durable
- No battery indicator
- Comparatively large
If simple water leak detection is on your mind, then take a close look at the Topvico flood alarm which is specially designed for this purpose. The battery operated alarm boasts of providing complete protection to your home from water leakage. The sensor board of the device is so active that the alarm will start ringing even with the touch of a wet finger. You can place it near the sump pumps or even underneath the sink and prevent the costly water damage.
The detector features a 3M double side paster which makes it easy to install the device anywhere in a jiffy. It comes with a 37.8-inch cable which helps in placing the sensor at different locations. Furthermore, due to the small size, you can place it at the tightest spot. In short, you will not spend more than 3-4 minutes on the installation of the device.
Topvico flood alarm is battery operated and uses the standard 9V battery. Usually, the life of the battery is 12 months for low usage and 6 months for very high-frequency alarm or testing.
The sensor is strong enough to detect water even from the corners. It features a highly sensitive 24K gold plated detect board which can detect the tiniest amount of moisture. Interestingly, it features 3 different water sensors and the alarm rings only when all the three sensors touch the water. This helps in preventing false alarms.
Topvico offers one of the loudest built-in alarms. The 120DB high pitched siren can be heard by the neighbors who can help in averting a major disaster. Furthermore, the siren rings until the sensor dries off or the sensor is turned off.
- The sensor is loud and sensitive to water
- Easy to install
- No indication for low battery
11. Smart Wi-Fi Water Sensor, Flood, and Leak Detector – Alarm and App Notification Alerts, No Expensive Hub Required, Simple Plug & Play by Wasserstein
If you’re looking for a device which will warn you on detecting the first sign of moisture – look no further than the water sensor from Wasserstein. This Wi-Fi enabled detector beeps on detecting potential water leakage and protects your home from the costly water damage. Due to the compactness of the size, you can fit it in areas where other sensors fail to penetrate. At an affordable rate, it’s your best bet.
The water sensor is made durable and is exceptionally compact. Due to the compactness, you can install the detector at any desirable place. You can place it near the washing machine, water heater and even under the tightest spot of the house. Furthermore, the bottom of the sensor features 3 gold-plated probes which help in setting the alarm when water touches the feet of the probes.
Apart from making noise on detecting water, the built-in alarm sends push notification to all the connected mobile devices. You have to install the app, and the dual alert system will help you avert a disastrous situation.
You probably hate a sensor which requires you to change the battery now and then. Wasserstein understands the problem of battery draining because of which it offers CR2 battery which is long-lasting. It can keep the device on the standby mode for more than 6 months. Furthermore, using the Android and iOS app you can monitor the battery level and change when the battery completely drains.
No extra charges
Unlike other detectors which ask you to pay the price for the hub, you don’t have to buy a pricey hub to enjoy the complete functionality of the device. All you have to do is download the app, connect to a reliable Wi-Fi network and monitor the sensor from anywhere.
If you’re not satisfied with the product offered by the company, you get a full refund or replacement for up to 3 months. The company is offering the warranty to built trust among the customers.
- Easy to install
- Compact size and long-lasting battery
- Free app and loud alarm
- Hardware randomly disconnects from the device
The water detector is automatic, simple and easy to use. You can install the alarm near the sump pump, washer, heater, or below the sink. With this inexpensive detector, the chances of averting a flooding situation are incredibly high. You will never repent your decision of buying Instapark because it will help you save your home and money.
It comes equipped with a detection sensor which is 44-inch long. Therefore, you can even place the sensor on the floor and still detect the possible water leakage. You can install the sensor on the flat surface due to the presence of a built-in suction cup. It also features a bottom plate which helps in securing the sensor in place and lowers the sensitivity.
It’s effortless and easy to install. The alarm of this 24/7 365 days automatic water detector is triggered when even a small amount of water is leaked from the pipes or other areas.
The detector works on a single 9V alkaline battery which is included in the sensor. The life of the battery is close to 2 years due to which you can rely on the detector while on vacation.
It features an in-built 130 DB alarm which can easily be heard up to 100 yards. With the help of a great siren, even the neighbors are alerted of the upcoming flooding situation. Due to the alarm, you can prevent property damage, monetary loss and also health risk associated with water damage.
Using the suction cup, you can easily install it on any appliance. Furthermore, the detector is easily removable and comes with a double-sided foam tape which makes it easier to clean the device.
- It features three alarms
- The detector wire is long
- The siren is loud and can be heard from a distance
- Comes with 3 batteries for three alarms
- Useless suction cup
- Installation of the battery is difficult
13. Aeotec Water Sensor 6 Z-Wave Plus Flood Sensor, Freeze, Leak & Temperature Detector Water Sensor
Unlike other detectors available in the market, Aeotec water sensor helps in monitoring and safeguarding your home against leaks and floods in real-time. Using low energy and its communication protocol Z-Wave plus, the detector sends alerts to the hub which converts into text messages. For those who use a smart-phone hub, Aeotec water sensors are the best because it’s affordable and reliable.
Leaks usually occur in inaccessible areas such as behind things, under things and all other places which are difficult to reach. And, at such sites, you notice the leak before the damage is already done. Therefore, water sensor 6 is built keeping in mind these problems. It’s only 3.8 cm wide and 2.4 cm tall. It can fit anywhere.
It features a water sensor, a vibration sensor, and even a temperature sensor. The 4 gold tipped water probes of the water sensor monitors the potential leakage areas. Additionally, the vibration sensor helps in indicating tamper and emergency events by detecting the vibration. The in-built temperature sensor helps in keeping an eye on the temperature. It can monitor temperature between -20oC to 100oC.
The device operates on batteries which have a life of 2.5 years. The company has given due importance to the life of batteries because if cells die out soon, it becomes difficult to monitor the leakages while on vacation. The company also provides a hardwired power option.
It comes with an in-built siren which triggers even if there is a slow spray of water. Due to the 60 decibel loud alarm, you can avert flooding situation in your home.
Water sensor 6 can detect even small amounts of water – as low as 0.5mm of water. It can also help in anticipating sumps in the basement.
The detector uses the Z-wave plus technology which is certified with an open space wireless option ranging up to 492 feet.
- Three sensors
- Excellent leakage detector
- Simple, easy to use and compact
- Potential working issues with Smart things
14. Masswell Water Leak Detector, Up to 120 DB, 72 Hours, Louder Sound, Longer Alarm Detection Sensor for Perfect Protection of Your Belongings, 3 Pack
One of the biggest concerns for the homeowner is claiming insurance for a flooded house. The cost of repair and damage is a financial burden which you can overcome using Masswell water leak detector. With the average cost of repair due to water being well above $2000, a water detector is a must. Masswell offers water leakage sensor alarm which is simple, effective and low-cost. The small design is an added advantage because you can place it under the sink, behind the toilet and near any plumbing area.
The WD11 water leak detector is ideal for protecting your home from any water leakage. The detector is elliptical due to which it looks compact and doesn’t occupy much space. Furthermore, it comes with an ON/OFF switch which you can switch off when the sensor detects leakage. Interestingly, you never have to remove the batteries or dry the sensor to switch off the button.
You can set it up in less than a minute. Just unpack the detector, remove the battery cover, install the battery and use it.
It features a powerful 120DB sound alarm which you can hear up to 100 yards. Due to the loud alarm, it helps in protecting potential damage to the property. Furthermore, the sensor is incredibly sensitive. Even the moisture in your fingers can trigger the alarm. This allows you to catch hidden leaks.
This incredible detector from Masswell is automatic and effective because it works 365 days 24 hours and 60 minutes. It prevents any disaster from occurring.
Another added advantage of buying this detector is its ease of use. It features a built-in suction cup if you want to place the sensor on any appliance. Furthermore, it comes with an easy to clean double-sided adhesive foam tape pad.
Masswell believes in providing quality products to the customers because of which it offers a 100% money-back guarantee when you are not happy with the product.
- Sensitive and loud
- Prevents damage due to water
- No indication when the battery dies
The Fibaro Homekit flood sensor is a compatible way for monitoring your house for potential water leakage. Protect your property, health and stay financially stable with the Fibaro Homekit sensor.
Surprisingly, the flood sensor fits in your palm because it’s small and unobtrusive. It’s made from white plastic material and features three corrosion resistant gold feet at the bottom. The gold feet are responsible for detecting water leakage. Due to the retractable nature of the feet, the gold feet always touch the ground irrespective of the type of surface. The small size of the sensor empowers you to tuck it even in the tightest possible spots.
Even setting up the flood sensor is a cakewalk because you have to activate the battery by removing the cover. Furthermore, Fibaro connects the Homekit using a Bluetooth which helps you receive a notification while you’re away from home.
The flood sensor is extremely sensitive and starts flashing blue light the minute it comes in touch with water. Furthermore, on the detection of water, the device sends a notification to every connected device. But, it doesn’t provide any information when the leakage comes to a halt. The alert is usually sent only to an iOS device which might be problematic for some users. The sensor can detect water only when the water touches the gold feet. So, in situations where there is just a drip, the sensor is likely to miss the detection.
To further make life simpler for the users, the detector comes with a temperature sensor and acoustic alarm which will help you protect against the frozen pipes. Freezing can result in bursting of the pipes and even flooding. Interestingly, the sensor responds to Siri which empowers you to check the temperature in the particular room. Furthermore, using the Homekit, you can program the sensor to create visual alerts when the sensor detects a potential water leakage.
- Easy to use and install
- Temperature and acoustic sensors
- It takes a few seconds to alert the homeowner
- Potential issues with Bluetooth connectivity
- Water should touch the feet of the sensor for the alarm to sound